1 / 5
Wurth Flashlight Switch Holder – DIY Repair
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Switch holder to repair a Wurth flashlight when the original button no longer keeps the light on.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
If your Wurth flashlight no longer keeps the light on with the original button, this DIY solution allows you to fix it easily and effectively.
I designed a switch holder, consisting of two pieces, that allows you to secure an alternative switch in place of the original system. The two pieces are joined using small nails heated with a lighter, ensuring a solid structure without the need for screws or glue.
🔧 Printing and Assembly Instructions:
- Recommended Material: PLA.
- Layer Height: 0.2 mm for a good balance between detail and print speed.
- Infill: 60% for increased strength.
- Supports: Not required.
- File Preparation: Before printing, split the model into its two separate components for proper printing.
- Assembly: Insert the switch into the holder and secure the two pieces together using heated nails.