1 / 5
Wurth Flashlight Switch Holder – DIY Repair
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Switch holder to repair a Wurth flashlight when the original button no longer keeps the light on.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 1
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
If your Wurth flashlight no longer keeps the light on with the original button, this DIY solution allows you to fix it easily and effectively.
I designed a switch holder, consisting of two pieces, that allows you to secure an alternative switch in place of the original system. The two pieces are joined using small nails heated with a lighter, ensuring a solid structure without the need for screws or glue.
🔧 Printing and Assembly Instructions:
- Recommended Material: PLA.
- Layer Height: 0.2 mm for a good balance between detail and print speed.
- Infill: 60% for increased strength.
- Supports: Not required.
- File Preparation: Before printing, split the model into its two separate components for proper printing.
- Assembly: Insert the switch into the holder and secure the two pieces together using heated nails.