1 / 5
4x20 and 5015 Creality Sprite extruder fan mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mod allows to fit a quieter hotend fan, and a more powerful part cooling fan on the Creality sprite extruder
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This mod allows to fit a quieter hotend fan, and a more powerful part cooling fan on the Creality sprite extruder. I suggest orienting the parts like in the picture. Use PETG or more heat resistant filaments. Haven't noticed any issues with the noctua fan not cooling the hotend sufficiently.
Probe offsets:
X 31.55, Y 41.15
