1 / 2
Bend Guides for 16/10mm ZMT Tubing (Clip On)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guides for making ZMT soft tubing able to perform tight bends that are easy to put on and take off existing tubing.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Easy clip on tube guides for ZMT 16/10mm tubing to make tight bends possible without kinking the tubing. Should work for other 16/10mm tubing but I only have ZMT for testing.
Print using PETG or other high temp filament as PLA may soften too much when exposed to gaming heat.
MODELS HAVE A VERY SMALL CONTACT AREA! USE OF BRIM MAY BE REQUIRED!