1 / 5
Portafilter Tamp Station: Breville Oracle, 58 mm size — zdjęcie 1
1 / 5

Portafilter Tamp Station: Breville Oracle, 58 mm size

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A customized wide-base version with air holes for 58 mm Breville portafilters. Printed in ASA.

Ocena
0 / 5
Polubienia
15
Pobrania
61
Wydruki
0
Wyświetlenia
277
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Share Alike

As with the original, this is a tamping station for the Breville 58mm portafilter part number SP0001817.  It should work with any Oracle or other machine that uses this filter.

I got a Breville Oracle Jet and needed a stand for my portafilter to rest in when not in use. Sometimes it has some extra moisture in it, so I added ventilation holes, and I modified the base to be wider and less likely to tip from the original style.  I additionally knocked-out the portafilter tab slots to give it a little more wiggle room.

I printed this tamping station @0.16 mm layer height out of ASA by modifying the original's STEP file.  When printing in ASA, I scaled the model up by ~ 1/0.9934 = 100.66 % to get a good fit.  If you print in something that shrinks less, you may not need to scale at all.

Included BambuSlicer 3MF setup to print on my X1C.

  This is a remix based on @rotf101's design.

Tagi