1731 modeli
WDT is an art. Its chaotic nature takes skill to master consistently. Umikot is a Tagalog word which means: to spin; to turn around; to revolve; to rotate; to circle; to go around; to swirl; to gyrate. In that spirit, this 3D printable…
NOTE Check out the improved version of the model at https://www.printables.com/model/574794 ! I like to stress-test prints that I don't intend to “keep forever.” I used organic supports for the two smaller pieces and brim on the elbow.…
Here is my take on the tricorder featured on the later seasons of Star Trek: The Next Generation. It has the option of being a standard science tricorder and can be converted to a medical tricorder using magnets to swap parts. Update log…
For the past year and a half, the Lily58 has been my trusted daily driver, delivering a gratifying typing experience. As the first mechanical keyboard I built, it holds a special place in my heart. However, most kits out there disappoint…
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
You don't have a 3D printer but you need it? Buy on Etsy with Worldwide shipping → buy here __________________________________________________________________________________ IKEA spare part number 10087158 / 10082805 Fits only IKEA…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Please report a portafilter or other equipment that is not fitting, plus its dimensions. The tamper station features: holding the portafilter for preparing the puck (adjustable via vertical screw) storing two bigger 51-54 mm or 58 mm…
This model is compatible with the lego system.
“CM3588 NAS Case Desktop Standalone” - pretty much this.
This is a Lens Hood for a 58 mm Canon EOS Lens. Suitable for a focal length from circa 18mm
This model is compatible with the lego system.
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…
Mount (clip) for Shure SM58 and other compatible microphones. With 3/8-16" mount (for standard microphone stand) and 1/4-20" mount (for photo stands/tripods). Can be used with original screw and nut as well as any part can be used instead…
This model is compatible with the lego system.
This model is compatible with the lego system.
This coffee distribution tool is a copy of the OCD tool, for evenly distributing the coffee before tamping. It is adjustable and I made it so the 3mm screws can lock the internal adjuster/spacer in place. however it doesn't actually need…
Features No support Minimal filament 5g (54mm) 7g (58mm) Compatibility 54mm (untested) 58mm/58.5mm (tested on Decent Espresso and VST Precision Filter Baskets) Print Settings PrusaSlicer 0.15mm quality with 0.4mm nozzle
For those of you with ECM Manufacture coffee machines, here's a model of a tamping station or stand for your standard or naked portafilters. Best to do it in ABS or PETG as PLA may melt with a hot portafilter.
This model is compatible with the lego system.
I am Genuinely surprised how many likes and downloads this model got, it is my most successful model so far thank you everyone I printed mine in Bronze-Colored PLA with 15% infill, brim, and supports everywhere. Be VERY careful when…
Both pieces need supports . It should take less than an hour and a half in total. For the settings keep reading, for the story skip down below. The assemble it make sure all supports are cleared and slide the end without the ridges under…
All informations are included in "manual" pdf BOM: 5mm carbon or glass fibre rod 4mm carbon or glass fibre rod a lot of m3 screws and nuts m3 inserts copper wire 05, 1 and 2 mm diameter and solder sailcloth How I Designed This Category:…
This is a case for the awesome Commodore 1581 floppy disk drive replica project presented by toms01 on Forum 64 . The case closely resembles the original with some practical changes to make it more 3D-printable and to accommodate 'modern'…
A tamping station compatible with Lelit 58mm portafilters (PLA580*) for the Lelit Glenda and similar espresso machines. There are two versions, one is a simple tamping station with slots for the ears of the portafilter and the other is…
In honour of Pokemon Go's Mudkip Community day (July 21st) I have knocked up a Mudkip one piece and multi-material model Totally needs supports Print instructions Category: Creatures
This is a 3D model of a coffee distributor tool, perfect for ensuring an even and consistent tamp in your portafilter. The model supports both 53mm and 58mm sizes to fit different espresso machines. To assemble this model, you’ll need…
Portafilter Funnel for espresso machines, comes in multiple sizes. Features: Tamp through Prevents waste (Spill over) Sits properly no magnets needed! Works well in combination with WDT tool Easy to clean Beautiful Print instructions…
Chess Dubrovnik Set - mod easy to print Kingsize 3.86" (for a board with 58mmx58mm fieldsize) Chess #Dubrovnik #Staunton /////////////////////////////////////////////////////////////////////////////// The set - except of the knight - is a…
Requires supports. I consider this a work-in-progress, I have not printed it myself yet. I may make a 2-part version that is easier to print. #1319971112300 This person is illegally selling this on Etsy even though my design does not…
Niche Zero holder for Sage/Breville or La Marzocco 58mm portafilter. Designed to stylistically match the grinder while still seamlessly integrating the stock dosing cup and holder. It is an elegant way to grind directly into a portafilter…
The 3D model is a case for the Allium58 GLP keyboard. The keyboard is modified from Lily58 Pro. The bottom case can also be used with other plates with 1.2mm thickness. Parts to be printed Allium58 bottom case Allium58 bottom case…
split for smaller printers, may updated once the warbond is officially opened and i get a better view. takes a ½ in dowel Category: Props
2026.01.13 - Moved github links to codeberg. 2024.01.17 - Adafruit has a replacement for the main arduino board now. No code changes will be required, as the only change is to the accelerometer. The codeberg code doesn't use the…
This model is compatible with the lego system.
This is a Wallmount for your typical E61 Portafilter for the efficient organization of your Espresso stuff. Disclaimer: The original thing was shared by jimhigson on thingiverse under CC BY-NC 4.0 . I did reupload this to complete my the…
This model is compatible with the lego system.
Please print with food safe filament like PETG. Matching neodym magnets: Shape: disc Diameter (D) 5mm Height (H) 5mm Tolerances +/-0.1 mm May not fit to all VST-Baskets. Please check the outer diameter, should less or near 70mm. (see…
This is a simple lens cover that works with lens hoods. There are two versions to the latch (58mm lens grip); v2 has a slightly deeper hold and slightly more aggressive teeth. I recommend printing the grip pieces at 99% scale width so…
Fun and easy to assemble. Comes with a Quick guide for assembly.
58mm portafilter funnel with a 15mm funnel wall. I found that 15mm was the right height to prevent grounds spilling while breaking up clumps without being too intrusive under the grinder. The slots should fit most portafilters, if they…
Stand or holder for your puck screens generally sized for 58mm portafilters. This was sized specifically for the Flair58 puck screens although may work for other puck screens of similar size. Flair58 pucks screens measure at 58.4mm dia…
Printing Any material should be fine --it's not designed to hold food items or be subjected to heat/pressure. I used PETG, but that was to match the filament I used for the tamping stand and portafilter dosing funnel, which are subjected…
A simple lens hood for your CANON EF/EFS lenses. Prevent undesired glare, improve contrast in your photos, and add a personal touch to your camera gear. The stepped inner surface improves light-blocking performance. Compatibility This…
This model is compatible with the lego system.
Simple opening and closing spanner for standard 4- or 8-ribbed lids of canisters between 1L-60L volume (DIN 45 thread, Ø48.2mm | DIN 51 thread, Ø58mm | DIN 61 thread, Ø65mm). Turn tool around or use the included insert depending on the…
I bought this DeWalt DCV580 at a thrift store with only the hose. I needed attachments and made these with a way to store the extras. Crevice Tool: Similar to the original and also clicks into the DeWalt handle for storage and will not…
A belt buckle style lens cap holder w/ a color change at the top. Holds my DSLR kit lens perfectly. Edit December 12, 2022: The standard version accommodates a 1.575" strap. I included a new version to fit 2.00" wide straps.
Uses any 1.5mm plate, including the 3d printed one here. Designed for the 3mm heat set inserts from McMaster.
Giant Lego Knife (x10 = 20.2cm) Print two part and two join Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.1 Infill: 15 Filament: Eryone PLA silk grey Category: Construction Toys
Thanks to @trav_1593464 for letting me know that the holes for the pegs were left out of the original upload. The new 3mf has the holes in place. General: A model of the JASSM AGM-158 Stealth cruise missile by Lockheed Martin Why I…
LEGO PART 85861 Plate Round 1 x 1 with Open Stud
WDT (Weiss Distribution Technique) is a method of espresso preparation to evenly distribute coffee grounds in a portafilter to ensure a more even extraction of coffee from the espresso machine. This tool uses several needles spinning in a…
Shure sm57/58 Microphone Desk Clamp Stand + Headphone holder. Don't forget to print the screw that is a separate file.
Check my FB group if you need more info after reading below. Again a riser but this time one which is in line with the outer lines of the machine. I have tested it with the X1C and the P1S and glass fits perfect. You will need 4 top…
This model is compatible with the lego system.
Fits pretty much perfectly into the bestway flowclear pump model 58381. As far as I can work out, it is the Type I Version of the filter with model# 58093 which is 80mm in diameter and 90mm tall. Print two caps out of tpu and the inner…
Heavily inspired by rotf101's tamping-station (but created from scratch) - see "model origin" for link. I made this for my bottomless portafilter that come with my 2nd hand machine. I have a shades of coffee wooden handle that I fitted to…
A simple lens hood for your CANON EF/EFS lenses. Prevent undesired glare, improve contrast in your photos, and add a personal touch to your camera gear. Check out our growing collection of 3D printable designs for Photography ! Follow us…
This model is compatible with the lego system.
Victorinox Rambler Knife Scales 58mm Beta testing: Also added scales that can hold two toothpicks per scale, because of the angles the tools do not fit flush. Category: Tools
Introducing a specially designed Tamping Station for the Flair 58 portafilter. Modelled for precision, this functional accessory ensures a stable and wiggle-free tamping experience. Recommended for printing in PLA, PETG, or ASA; other…
A desktop stand for Lenovo laptops. Works with Thinkpad E580 and E480 so far, with a holder for the USB-C Thinkpad dock. Holds the laptop at a 30° angle, with the base of the screen roughly 15cm above the desk. Has small recesses…
I created for my Aurora Lily58 PCB Kit with MX switched from splitkb.com thie case. I used for the Oleds this Model: Aurora Lily58 Oled Housing PCB Hardware that I used Aurora Lily58 PCB Kit from splitkb.com with: RGB Underglow, RGB…
This model is compatible with the lego system.
This model is compatible with the lego system.
Wanted to repurpose my old Galaxy Tab as a home automation display. Noticed that this tablet model has built in magnets on the backside, probably for a flip cover. Mapped the placing of the magnets and made a thin bezel wall mount that…
Here I start dumping the 100+ STL of screw thread adapters that I've made for the Telecentric project Waiting for the famed OpenScad “universal adapter” Maybe I'll put them all here. Start with some M42: Camera mount thread M42x 1 adapter…
Remixed to make useful with a Eureka Mignon on a tilted base. It may also be useful for people who want the holder to retain the dosing cup more securely without a tilted base. Have also included a version for different size dosing cup…
This is the perfect coffee / espresso tamper in 4 different sizes: 57mm (Ascaso), 57,35mm (Lelit), 58mm (most of the other brands with 58mm grouphead) and 58,55mm (Lelit). I'm using the 57mm version with my Lelit PL41TEM and the Ascaso…
Measurements from FriendlyElec 3D Data For mounting in a 10" rack Additional 5050 Fan mount and 16mm power button. M.2 Slots not obstructed! 1U height (44mm height) Designed to be printed upright (front facing down) - should be possible…
Special feature is a scale with two slots for both tweezers and toothpick and optionally a side slot for a pin/needle (useful for removing SIM cards for example). An addition is a pen scale which requires pen and plastic part from…
Transform your Shure SM58 into a Shure SM7B with 3D printing, and save around $300! The Shure SM58 has similar technical specs to the Shure SM7B; the main differences between the models are the pop filter and design. We can’t replicate…
The battery covers or cups on the wireless Shure SM58 easily crack and eventually break around the threads if you twist the cap on a little too tight. This started as a remix of pmcpajadan's battery cover but I decided to re-implement it…
To anyone who cuts their own hair and keeps it shorter than a few millimeters, I can strongly recommend the Remington “indestructible” HC5880 hair trimmer. The “indestructible” attribute only applies to the trimmer itself, not the plastic…
This model is compatible with the lego system.
The wheel that I propose has been adapted and redesigned several times over time, durable and functional, it adheres well even on smooth surfaces such as tiles - something that with purchased wheels, often does not happen. (You are seeing…
Drawer Organizer for IKEA PAX Komplement 100x58 Enhance the functionality of your IKEA PAX Komplement 100x58 drawer with this customized organizer. Designed as a remix of the original "Parametric boxes for drawer" Fusion 360 file, it…
takes some 1/4 in rods for the handle and rod for the hinge. could use 6mm x 2 mm magnets for the mag as the hole is around 6mm/0.24 inch. had a removable mag, and is split for printing. Category: Props
A extra slim lens/photography filter case with magnets (6x2mm). Fits 77mm, 67mm, 58mm, 52mm and 45mm Filters. 92mm x 87mm x 10mm Maximum filter thickness 7mm
Do you need to attach a ND filter to your iPhone 17 Pro or Pro Max? Here's a solution. A total of 10 magnets are required. Magnets should be 10mm x 2mm . Glue magnets into each of the 5 depressions on both the base plate and filter ring.…
Required Hardware: Lily58 PCB kit & plate from any vendor (there are a lot) 10 x M2 heatset inserts (any should work) 10 x M2 screw 8 x 10mm rubber bumpers I screw my PCB to the case from above the plate, so I have I think 10mm M2 screws…
A replacement water reservoir cover with a place for two 58mm or 58.5mm tampers. For the Gaggia Classic Pro. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 15%, doesn't really matter…
This model is compatible with the lego system.
This storage case fits the FNIRSI FNB58 USB multi-meter/tester. The only extra hardware required are four 5x3mm magnets (which measured closer to 5x2.7mm for me). The holes are oversized enough that they will need a dot of superglue to…
This is a small fixture to mount the Flair 58's electronic control box to the neck of the machine. It's not absolutely perfect. As seen in the photos there I've added a small adhesive rubber bumper to the inside of the mount. Without the…
keebcu - andimoto7583 mechanical keyboard This is one of my keyboard designs I made with my keebcu keyboard customizer. It is a 75% mechanical keyboard which can be printed on smaller printers such as Prusa Mini. If you want to build the…
This model is compatible with the lego system.
A funnel with a small lip that wraps around the edge of 58mm baskets to help prevent grounds from getting trapped between the funnel and the basket during aggressive WDT, and eventually ending up on your counter. The lip is small enough…
This is a tamping station for Rocket Espresso 58mm (E61) portafilters. It allows you to tamp with one hand with single-, double- or bottomless portafilter. I printed it in PETG and fuzzy skin which gives it a cool look. I designed it with…
I made a new magnetic funnel for my portafilters. I own a Bezzera BZ10 (used to own a Gaggia Classic) and an open basket portafilter with an IMS B702TH26.5M basket. The Outer Diameter is about 70mm for my portafilter. The E61 variant has…
Printed in TPU/FLEX Tire 43.2 x 28 S Balloon Small : Part 6579 | BrickLink Wheel 43.2 x 28 Balloon Small with Axle Hole (+ Shape) : Part 6580a | BrickLink
This is the upper replacement part of a shure microphone holder. Printed with black PETG with support. The stl is a little bit messy, but slicer correct it when u load. top microphone hole diameter: 25mmm bottom microphone hole diameter:…
Easy to print, ideal with outside facing your print bed. Tested in PLA and ABS with 0.2mm layer height. Scales are press fit, if needed use parallel pliers to press them on your knife. Version with and without the Victorinox Cross, which…
this was actually a redo and combination of a few models all of which were incomplete and/or broken. I've also added my spinner wheel design.
This funnel has an outer lip and uses 16 magnets (4mm diameter, 2mm height) to hold onto the portafilter basket. It prints upside down without supports. Should fit most 58mm baskets. The bottom lip has a 70.2mm clearance, with a 58mm…
Ripper for the Huina 1550 / 550 Excavator Needs (3x) M2x8 screws for the pads OR use it without pads for easier ripping in hard ground V2 corrects a clearance issue with my Spring Coupler ( https://www.thingiverse.com/thing:3732951 )…
76mmx583R Shell (17-pdr) This Shell was used in the M4 Sherman “Easy 8” and Firefly Tank. It’s not 100% accurate but I think it’s pretty close. It's not meant to be a historically accurate replica, just close. I thought that if you’re…
![Chess Figure Set Dubrovnik [Kingsize 3.86"] - mod easy-to-print [for a board with 58mmx58mm fieldsize]](https://media.printables.com/media/prints/214964/images/1964918_1f7f8524-10d4-47f4-a17c-7be02bcff904/2022-05-27-20_52_51-window.jpg)
