76mmx583R Shell (17-pdr)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
76mmx583R Shell (17-pdr)
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 332
- Wydruki
- 1
- Wyświetlenia
- 1708
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
76mmx583R Shell (17-pdr)
This Shell was used in the M4 Sherman “Easy 8” and Firefly Tank.
It’s not 100% accurate but I think it’s pretty close. It's not meant to be a historically accurate replica, just close.
I thought that if you’re going to have a German 88mm (https://www.printables.com/model/372659-88mm-kwk-36-he-shell ) and an American 75mm (https://www.printables.com/model/388504-75mmx350r-shell ) you have to have an Easy 8 or Firefly 76mm as well.
I’ve created a projectile to fit this Shell using the same drawing.
I used a Brim with most pieces to assist with bed adhesion and a Skirt on the items with big flat bottoms.
Designed in FreeCAD.
Ender 3 v2, JAYO PLA+ Copper Silk (for the casing) and LONENESSL PLA Silver Silk (for the projectile), 0.4mm nozzle, 0.2mm Layer height.