Garmin Zumo XT attachment plate cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for the original attachment plate of the GPS navigator Garmin Zumo XT or XT2
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
If you use the Zumo XT/XT2 original attachment plate you might wanna use a better cover for the mount. Here is a model that snaps on just like the Zumo unit and covers everything.
Print instructions:
Might be a good idea to use paint on support on the notches, included in the 3MF.
Update June 2025:
Version 1: Original version was a clone of the GPS which fits really tight. That puts big strain on the construction, which was not too thick either. I noticed my print in PETG got bent and broken after a few months of use.
Version 2: New version which are slightly bigger and beefier to adress issues above. Should last longer and also easier to mount. Only downside is that it might provide less protection for the elements if that really is top priority, but this should be really minor. I would recommend this version if you don't have really strong filament.
If you like my work, consider buying me a coffee:
https://ko-fi.com/maildannesholkse
Check out other Garmin prints in the collection:
https://www.printables.com/@BentDerailleur/collections/2063450
