10" (x10") Minirack! NOW WITH MICRO ATX MOUNT!

I use 2x of these rails

 (note: some heatsinks make have issues with this, you should be able to drill in to give the screws/nuts more space, a redesign is in order but CPU placement isn't super standard across boards/gens so you could also just use taller standoffs)

It seems some rails have different side dimensions, I plan on redesigning so it can take almost any rails. Well it is PETG so you could add screws no matter how your side rails look, just drill them in. 

I am currently designing a couple models such as a better top (I currently reuse the base), and a storage shelf that fits above the bottom. 

MICROATX mount!: (this is only for 10"x10", Geekpi racks won't work) 

I printed with ~7 walls, gyroid infill, and no top or bottom layers. 

standoffs: https://a.co/d/9y7Z3Xo

Threaded Inserts: https://a.co/d/6hLIEog

it's about 5u without a low profile cooler, so I would seriously get one of them. it is ~3u, depending on what you have in your PCIE slots. 

Note: a PSU mount is in the works, I didn't realize how big they were lmao. 

Note: the microATX mount works, but should probably be printed in PETG or better, the Hottest a motherboard should get is around when PETG gets soft, with enough airflow it should be OK though. 

Note: this is 10"x10" so printing it can be pretty difficult, it requires some extra setup on a bambu x1c. If you really wanted to you could print the whole thing at an angle to fit, but that would be kinda silly. 

Note: HDD Mount is This model

Note: ~~11/64~~ 3/16 holes sometimes need to be drilled out of parts