X Carriage Mount for Stealthburner Sovol SV08
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Left and right X carriage mount modified for the SV08 to allow the Stealthburner to mount to the MGN12 rail.
- Ocena
- 0 / 5
- Polubienia
- 53
- Pobrania
- 213
- Wydruki
- 0
- Wyświetlenia
- 2394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a modification of the X carriage mount for a stealthburner on the Sovol SV08. The original Voron 2.4 mount works but the toolhead will hit the xy carriage assemblies during homing and not give the full range of motion. This is crucial if you want to incorporate a filament cutter.
Note: If you are using a bed probe sensor that mounts on the carriage with a probe retainer bracket, you will need to make sure the M3 screws do not stick out the back too far or they will also collide with the xy carriage assembly during homing. I marked 1mm coming out and used a dremel to cut the M3 screw shorter.
Update 6/8/25: I have added a version of the x carriage that uses thin M3 square nuts instead of the heat inserts on the lower part. I noticed the heat inserts were getting pulled out from all the movement of the tool head. Square nuts can be found here: https://a.co/d/2PhE3KQ