1 / 3
Bar End Mirror Adapter for Suzuki GSX-8S/GSX-8R — zdjęcie 1
1 / 3

Bar End Mirror Adapter for Suzuki GSX-8S/GSX-8R

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Made this as a quick way to mount some bar end mirrors on my GSX-8S that wouldn't fit. Should work on GSX-8R.

Ocena
0 / 5
Polubienia
4
Pobrania
20
Wydruki
0
Wyświetlenia
411
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

Made this super quick because I bought bar end mirrors for my GSX-8S and the handlebars don't support the common tube adapters. You will need a 10mm hex wrench to remove the stock bar cap, then place this on the bolt as a sort of washer. 

Mirrors seen in pictures: https://www.amazon.com/dp/B07T87NLJH?ref=ppx_yo2ov_dt_b_fed_asin_title

I imagine this would work with most bar end mirrors, but it will depend on the inner diameter of the mount. The ones pictured have an inner diameter of ~20mm, the model is set at 21.5mm with a small fillet to give the mount something to bite into.

I am unsure if this makes the bike unsafe, print and use at your own risk.

Printer: Prusa Mini+
Layer Height: 0.2mm
Infil: 100%
Scale: 100%

Tagi