Bar End Mirror Adapter for Suzuki GSX-8S/GSX-8R
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made this as a quick way to mount some bar end mirrors on my GSX-8S that wouldn't fit. Should work on GSX-8R.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 411
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Made this super quick because I bought bar end mirrors for my GSX-8S and the handlebars don't support the common tube adapters. You will need a 10mm hex wrench to remove the stock bar cap, then place this on the bolt as a sort of washer.
Mirrors seen in pictures: https://www.amazon.com/dp/B07T87NLJH?ref=ppx_yo2ov_dt_b_fed_asin_title
I imagine this would work with most bar end mirrors, but it will depend on the inner diameter of the mount. The ones pictured have an inner diameter of ~20mm, the model is set at 21.5mm with a small fillet to give the mount something to bite into.
I am unsure if this makes the bike unsafe, print and use at your own risk.
Printer: Prusa Mini+
Layer Height: 0.2mm
Infil: 100%
Scale: 100%
