FlashForge Adventurer 5M (NOT PRO) lower filtration fan spacer. (Fan to back panel vent holes.)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is designed to go with the previous fan spacer I designed to retrofit filtration on the 5M.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 226
- Wydruki
- 2
- Wyświetlenia
- 1629
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This goes with the previous fan spacer I made for the 5M (not the PRO) to go between the lower filter fan and the back cover vent holes.
I designed it to work with TPU, and that's the filament I have tested it with. The spacer slides over the fan body. The back panel sandwiches it in place. TPU allows some flex in the fitment and seals better against the back panel. (I've printed both fan spacers in TPU for 5M.)
Apologies as it's not the tidiest CAD effort- my skills are limited to Tinkercad.
The other spacer this one works with is here https://www.printables.com/model/937459-flashforge-adventurer-5m-lower-rear-fan-spacer-to