1 / 7
Sturdy parametric towel hook hanger with snap fit! no supports - easy make! — zdjęcie 1
1 / 7

Sturdy parametric towel hook hanger with snap fit! no supports - easy make!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Place your towel conveniently on a bathroom pipe heater. Modify dimensions using FreeCAD 1.1.0dev to suit your needs.

Ocena
0 / 5
Polubienia
4
Pobrania
17
Wydruki
2
Wyświetlenia
99
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Tired of wet towels laying around your bathroom? Try this towel hanger that snaps on pipe radiator. This is a parametric design, it lets you take control of dimensions with the help of FreeCAD-1.1

Software can be found here:

https://github.com/FreeCAD/FreeCAD-Bundle/releases/tag/weekly-builds

 

I recommend these settings for durability and sturdiness:

  • use at least PETG (keep in mind radiator temperature for material selection)
  • minimum 3 perimeters
  • minimum 4/3 layers top/bottom shell
  • minimum 15% Gyroid infill
  • 5 mm brim with 0.7mm spacing
  • disable supports
  • single top/bottom most perimeter with Hilbert Curve infill because it looks neat

 

I provided a sample gcode for MK4S with PETG and dimensions as shown on the images:

  • heater pipe radius 22.05mm
  • heater pipe axial offset 42.00mm
  • hook diameter 11.25mm
  • hook ball diameter 4.5mm
  • profile width 3.6mm
  • profile height 10mm
  • chamfer 0.8mm

Although parameters can be changed, keep in mind radiator gap when altering hook and hook ball diameter. Just fire up FreeCAD, open parametric_towel_hook.FCstd and modify values in Parameters varset.

 

Like, share, comment and give feedback. 

I hope you find this model useful.

Tagi