Sturdy parametric towel hook hanger with snap fit! no supports - easy make!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Place your towel conveniently on a bathroom pipe heater. Modify dimensions using FreeCAD 1.1.0dev to suit your needs.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 17
- Makes
- 2
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Tired of wet towels laying around your bathroom? Try this towel hanger that snaps on pipe radiator. This is a parametric design, it lets you take control of dimensions with the help of FreeCAD-1.1
Software can be found here:
https://github.com/FreeCAD/FreeCAD-Bundle/releases/tag/weekly-builds
I recommend these settings for durability and sturdiness:
- use at least PETG (keep in mind radiator temperature for material selection)
- minimum 3 perimeters
- minimum 4/3 layers top/bottom shell
- minimum 15% Gyroid infill
- 5 mm brim with 0.7mm spacing
- disable supports
- single top/bottom most perimeter with Hilbert Curve infill because it looks neat
I provided a sample gcode for MK4S with PETG and dimensions as shown on the images:
- heater pipe radius 22.05mm
- heater pipe axial offset 42.00mm
- hook diameter 11.25mm
- hook ball diameter 4.5mm
- profile width 3.6mm
- profile height 10mm
- chamfer 0.8mm
Although parameters can be changed, keep in mind radiator gap when altering hook and hook ball diameter. Just fire up FreeCAD, open parametric_towel_hook.FCstd and modify values in Parameters varset.
Like, share, comment and give feedback.
I hope you find this model useful.