Wall plate for 7inch LCD touch screen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount/plate for a 7inch LCD touch screen. Perfect for Home Assistant!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 408
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Public Domain
Required parts
- 4 screws for mounting (4mm diameter)
- anchors adapted to your wall
Model
The big part on the bottom hides the cables.
Print instructions
The plate is separated into two parts to fit the Mini+ plate. It can be printed using a large nozzle. I printed mine using a 0.8mm nozzle and the result looks great while keeping the print time manageable.
The spacers should maybe be printed more precisely. I used a 0.4mm nozzle for mine.
Mounting
I didn't think about it too much during the design phase. In retrospect, it's not that easy to mount but it's doable.
⚠ There are two sizes of spacers:
- 11mm spaces go against the wall;
- 10mm spacers go between the plate and the screen.
Use 4mm diameter screws for mounting. You'll probably need to drill the existing holes on the screen PCB since they're too small.
- Drill your wall for your anchors
- Mount the screen using the top part of the frame and two screws
- Drill the cable hole
- Pass your cables and plug them on the screen
- Attach the bottom part