Replacement spikes for ice overshoes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
printed insert that uses M3 screws and nuts to replace some spikes that fell out of my ice spike overshoe things
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I don't know what brand my ice gripper overshoe things are, but if the holes in yours are about 5.5mm these should fit - you need an M3 x 12mm countersunk screw and a nylock nut.
I haven't used them on ice yet, so might fall apart! Having just looked online, the overshoes are cheap to buy anyway, so if these don't work I will just buy new, but it's nice to try fix things first!
They are slightly chunkier that the existing ones, but wanted to make them as strong as possible, that's also why the nut isn't flush…