1 / 6
Creality Electronics Enclosure -- Mainboard, LCD, Fan all in one and mountable
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is to re-utilize electronics components from a Creality printer (Ender 3, CR10, etc.) for other projects.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
After upgrading my Ender 3, the original mainboard and LCD screen were begging to be re-utilized in another project. Fortunately I had an old polargraph build in need of improvement so I produced this enclosure to mount the electronics neatly to a 1x3 wood board.
It's a weirdly specific application, but I thought somebody might find it useful.
Assembly uses M3 screws and nuts.
* The photo shows a fan shroud installed, that's not part of the design but can be found by searching around.