1 / 1
LSI 9305-16i Fan Shroud for 60mm fan. — zdjęcie 1

LSI 9305-16i Fan Shroud for 60mm fan.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I had a 60mm fan spare and remixed the existing fantastic design for this card to accept the 60mm fan.

Ocena
4 / 5
Polubienia
8
Pobrania
122
Wydruki
0
Wyświetlenia
1306
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
GNU General Public License v2.0

I printed this on its side with only necessary support. I'm not sure which is best for it. 

The fit is excellent. Be very careful with the clip on the heatsink as the heatsink is not rigidly mounted and the chip on the PCB has no metal cover. Twisting and moving the Heatsink too much can crack the chip. 

My advice is to shave off the clip as it's not really needed. 

This will also fit 9305-24i if you cut out the slot for the extra 2 connectors. Just use a negative volume in your slicer to remove them.

My appreciation to the designer: FireTime. A very precise and nicely done design!

Tagi