1 / 8
Bearing for Hadley telescope base  (for 18x200mm boards) — zdjęcie 1
1 / 8

Bearing for Hadley telescope base (for 18x200mm boards)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bearing for 18x200mm wood boards.

Ocena
0 / 5
Polubienia
1
Pobrania
23
Wydruki
0
Wyświetlenia
93
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Printable bearing for the Hadley Telescope if you want to use 18x200mm boards for making the base. 

I printed it laying flat on its side, 30% infill and no supports. 

P.S: I used 2x “IKEA Snudda” for the circular bottom of the base, they are hardwood, 39cm in diameter and cost less than buying boards and cutting them myself. Remove the lazy Suzan bearing and use some PTFE-knobs instead and a center bolt. Use spacers, springs or shims around the center bolt to take some of the weight of the furniture knobs. 

Tagi