1 / 8
Bearing for Hadley telescope base (for 18x200mm boards)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bearing for 18x200mm wood boards.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 94
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printable bearing for the Hadley Telescope if you want to use 18x200mm boards for making the base.
I printed it laying flat on its side, 30% infill and no supports.
P.S: I used 2x “IKEA Snudda” for the circular bottom of the base, they are hardwood, 39cm in diameter and cost less than buying boards and cutting them myself. Remove the lazy Suzan bearing and use some PTFE-knobs instead and a center bolt. Use spacers, springs or shims around the center bolt to take some of the weight of the furniture knobs.