1 / 3
Gokou Ruri 1/8 Figure Base
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base for this Gokou Ruri figure https://myfigurecollection.net/item/155101
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 409
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
Base for this Gokou Ruri figure.
The original base had a laced pattern on it so I added a similar pattern made by
awie08 over on vecteezy.com. There are two versions one where the pattern is raised and another where it's sunk into the base. There's also a plain one.
This requires 2.5mm and 3mm metal rods. I purchased them on amazon and cut them using a dremel.
The rods need to be cut to the following sizes.
Right Foot:
Heel - 3mm - 1 x 13.5mm
Toes - 2.5mm - 1 x 10.5mm
Left Foot
2.5mm - 1 x 10mm