1 / 3
Gokou Ruri 1/8 Figure Base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Base for this Gokou Ruri figure https://myfigurecollection.net/item/155101
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 409
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
Base for this Gokou Ruri figure.
The original base had a laced pattern on it so I added a similar pattern made by
awie08 over on vecteezy.com. There are two versions one where the pattern is raised and another where it's sunk into the base. There's also a plain one.
This requires 2.5mm and 3mm metal rods. I purchased them on amazon and cut them using a dremel.
The rods need to be cut to the following sizes.
Right Foot:
Heel - 3mm - 1 x 13.5mm
Toes - 2.5mm - 1 x 10.5mm
Left Foot
2.5mm - 1 x 10mm