CMStorm Quickfire Rapid-i USB-C mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mount for replacing the original USB-port of the CMStorm Quickfire Rapid-i with a USB-C one.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A simple mount to directly replace the original USB-port of the CMStorm Quickfire Rapid-i with a USB-C one.
The two parts and the USB-Breakout-Board are simply glued together with superglue, I additionally secured the cables with some hot glue.
Parts used:
- Simple 4-pin USB-C breakout (the one I used on Aliexpress)
- 5-pin PH 2mm connector (on AliExpress, the 200mm version)
The fifth pin on the connector is used for the cable-shielding on the original setup. For me, everything works fine without it, so I removed the fifth cable from the PH-connector.
The pinout of the original cable follows the standard USB color-code:
- red is positive
- black is ground
- green is data +
- white is data -
Just wire the replacement accordingly. I rearranged the cables in my pictures, please be careful!
For printing, I strongly recommend a small nozzle (e.g. 0.2mm).