Plant pot feet and mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This plant pot foot lifts your pot a bit of the ground. Or use the mold to cast some out of plaster, clay, concrete, etc
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 105
- Wydruki
- 1
- Wyświetlenia
- 1239
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This plant pot foot lifts your pot a bit of the ground. Or use the mold to cast some out of plaster, clay or concrete.
The mold is of course reuseable!
If you use them Outdoor it helps to avoid circular stains under your pot and acsess water can drain out of the pot easier. This is important with plants, who do not want wet feet, such as Citrus, olives and cacti. It also helps with Air circulation and plant Roots need Air ;) The Italians call them Piedini.
For casting you will need the mold left and right and 4-6 M4 screws and nuts. (2 work on the smallest model just fine)
Use Vaseline (Petroleum jelly) or kitchen oil to Prime the mold. This makes the de-molding process way easier. (without is a real struggle, but possible)
There are 3 sizes available:
S 35x15mm
M 45x20mm
L 75x30mm
All Models have their size indicated with the Letters S,M or L. Make Sure you Always Print mold Left and right!
If you Made this model, please let me know how you Likes it!