1 / 2
Desperado Elite Cylinder _BETTER DART FIT_ (Dart Zone, Adventure Force) — zdjęcie 1
1 / 2

Desperado Elite Cylinder _BETTER DART FIT_ (Dart Zone, Adventure Force)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Desperado Elite Cylinder with extra long and tight barrels

Ocena
0 / 5
Polubienia
28
Pobrania
87
Wydruki
0
Wyświetlenia
530
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Share Alike

Desperado Elite Cylinder with extra long and tight barrels

for 1x elite sized dart
or 1x short dart loaded with ramrod (highest fps)
or 2x short darts (shotgun)

You have to use at least a 10mm spring spacer for good fps results because the barrels are very tight and need more pressure 

+10mm spacer: short dart with ramrod ~100fps, standard dart ~91 fps
+20 mm spacer: short dart with ramrod ~105fps, standard dart ~103fps

If you want to shoot 2 short darts at once you should use at least a 20mm spring spacer otherwise the darts will not fly well.

As with all printed barrels, it is always a good idea to sand the inside of the barrels with a rolled up piece of sandpaper to smooth it out a bit.

The file is already pre-oriented.

My print settings for PLA:

0,2mm layer height
5 walls
20% gyroid infill
7 top and bottom shell layers
Tree supports are needed for the opening of the axis mount in the middle

Thanks to png for the files I could use for this remix.

The half dart only cylinder (by png) with shorter barrels you can download here.

Tagi