Cover for door hinges ⌀16mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple cover for the drill-in hinges for interior doors
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Upon my wife's request, I made these sleeves to match the hinges in our entire house with the color of our door handles. You can simply slide them over the hinge, but please note that the hinges are not symmetrical — the top part is slightly higher. Check the respective image for the dimensions to ensure the cover will fit. It should be a tight fit; otherwise, the lower part may come off too easily.
I recommend painting the seam on the side where it is not visible, as I did in the included 3mf file.
I've also included the FreeCAD file in case you need to make any adjustments.