IKEA BROGRUND shower shelf offset mount (Old Version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It enables the shelf to be mounted on a pipe that is too close to the wall for the original wall.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Public Domain
An updated, easier to remove supports from model is available HERE:
It enables the shelf to be mounted on a pipe that is too close to the wall for the original wall.
You still need the U shaped pusher with the rubber end and the nut from the original one.
I have it printed in PLA with 0.2 mm layers with a 0.6mm nozzle. 0.4mm nozzle should therefore also be fine in terms of wall thickness and a less stiff material like PETG should work just fine if not better.
Supports unfortunately are needed with this one, but i have found it to be quite simple to clean up.