Voron v0 Picobilical Toolhead PCB mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PCB mount with multiple ziptie points and cleanly prints with no supports.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed for the picobilical (v2 I think) tool head PCB and the sherpa mini extruder/pancake extruder motor. (rendered images are not the v2 PCB). Should work fine for any pancake motor regardless of the extruder, but I have only tested it on my setup.
Inspired by many other designs that just seemed to be missing one thing or another, or had an extra pokey bit or something that got in the way of something else, or just didn't print well and required supports….
This fits cleanly behind the rear of the pancake extruder, spaced enough to avoid contact of the underside of the PCB. The part prints flat on it's back without supports! and has zip tie points for the tool head wiring as well as a place to anchor the umbilical harness.
Two 16mm standoffs are used to clear the stepper motor. I used two threaded aluminum standoffs that might have come with the LDO v0.2 kit or might have come from my stash of drone parts, I do not remember. They are common and threaded for M3 x 0.5 screws. I included the 3MF files for these, but as they are round, they would need to be printed in the vertical (weak) orientation. If printing these spacers, you may need to thicken them or redesign them to use a hexagonal profile instead of a circular profile.
Two M3 x 20mm screws replaced the 12mm screws that attach the stepper motor to the sherpa mini.
Two M3 x 16mm screws are used to secure the PCB through the PCB mount to the standoffs.
In the renders, mount = yellow standoffs = blue