1 / 5
Raspberry Pi 2B/3B/4B/5B 10-inch Rack Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 10-inch rack mount for two Raspberry Pi devices. Compatible with RPi 2B, 3B, 4B and 5B
- Ocena
- 4,75 / 5
- Polubienia
- 285
- Pobrania
- 2560
- Wydruki
- 14
- Wyświetlenia
- 11 627
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 14) (Komentarze: 31)Remiksy (9)Kolekcje (644)Powiązane
A 10-inch rack mount for two Raspberry Pi devices. Compatible with RPi 2B, 3B, 4B and 5B.
This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here.
Do you like my models? Consider buying me a coffee ;)
Updates
- 02 Aug. 2025: I've included the version 1.2 of this model, with the following modifications:
- Added a non thread insert variant of the model.
- Added mounting holes all the way to the back, so you can also mount hats that require screws coming from below.
- 11 Feb. 2025: I've released the version 1.1 of this mount, with cutouts for the micro SD cards, making it easier to insert and remove them. I have also reinforced the mount, making it sturdier.
Required parts
- (Optional) 8x M2.5 thread inserts.
- 8x M2.5 screws.
Assembly instructions
- If using the thread insert variant, insert the 8x M2.5 thread inserts into the mount.
- Insert your Raspberry Pi into the mount.
- Secure it with 4x M2.5 screws.
- Repeat the process for the other Pi.
Print Settings
Rafts:
Doesn't Matter.
Supports:
No.
Resolution:
0.2 or 0.24
Walls/Perimeters:
3.
Infill:
20% or more.
Filament:
Any.