3d Printed Micro Hybrid Fuel Grains
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d printed micro hybrid rocket motor fuel grains.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
These are made to fit a Micro Nitro Rocketry micro hybrid rocket motor. They can be printed out of pretty much whatever you think will work as fuel. There is an 11 point star, a 5 point star. There are also versions that will fit a phenolic liner- if you print them from PLA, this is recommended. I have also included one that it just a liner- this is thinner than a phenolic liner, so can not be used with the other fuel grains, but it can be used to cast your own fuel grains from whatever else. I have test fitted them, but not test fired them.
WARNING PLEASE READ: THESE ARE HIGHLY EXPERIMENTAL (I myself have not tested them yet) SO USE THEM AT YOUR OWN RISK. I will update this once I have used them, then maybe make some changes. I AM NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY CAUSED BY THESE FUEL GRAINS!!!!!!!!!!!!!!!