3d Printed Micro Hybrid Fuel Grains
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3d printed micro hybrid rocket motor fuel grains.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
These are made to fit a Micro Nitro Rocketry micro hybrid rocket motor. They can be printed out of pretty much whatever you think will work as fuel. There is an 11 point star, a 5 point star. There are also versions that will fit a phenolic liner- if you print them from PLA, this is recommended. I have also included one that it just a liner- this is thinner than a phenolic liner, so can not be used with the other fuel grains, but it can be used to cast your own fuel grains from whatever else. I have test fitted them, but not test fired them.
WARNING PLEASE READ: THESE ARE HIGHLY EXPERIMENTAL (I myself have not tested them yet) SO USE THEM AT YOUR OWN RISK. I will update this once I have used them, then maybe make some changes. I AM NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY CAUSED BY THESE FUEL GRAINS!!!!!!!!!!!!!!!