3D-corner, slanted
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Join three beams at 90 degrees for a 3D corner, also prints slanted for uniform x-y-z strength
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v2.0
Need to join three beams to form the corners of a cube/frame/enclosure? This model is designed for 22mmx22mm square profiles, but can be scaled up or down according to your needs. It will hold them in a reasonably close to 90 degrees angle.
Also included are more-than-enough holes for screwing the beams sturdily to the part, with 3mm or 3.5mm wood screws
The design is tilted to mitigate layer adhesion weakness in the holder for one of the three beams. You need to print it on the triangle bottom face, use the “place on face” feature of your slicer.