Shrek Beware Ogre Magnet (multi-color)(8x3mm magnets)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Beware, Ogre
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Pictured Examples printed on a BambuLab X1C (Textured PEI)
Face-down Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s
Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). I used the paintbrush to manually add the highlights, as well as coloring half the lettering with a darker red.
8x3 Magnet recesses to allow gluing in the magnets easily (magnet strip can be used instead)
Hope you enjoy!
(see my profile for other multi-color prints, as well as face-up manual color print designs if you don't have a multi-material option)