Small Desk Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small Desk Hook for Jackets, bags, etc. Max. thickness of the board: 24mm
- Ocena
- 4,833 / 5
- Polubienia
- 225
- Pobrania
- 891
- Wydruki
- 6
- Wyświetlenia
- 2207
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
There are a lot of desk hook models here. They look great, but they were all too big or too sharp for me.
So I made my own. It is designed for board thickness up to 24mm. I you need it bigger just scale it up in x and y.
I had best results in printing in PLA with 6 walls, 10 top and bottom layers and 25% hexagon infill. No support needed.
ABS, PETG and ASA also worked well, even when printed less massive.