Baby Groot Flower Pot Wall Mounted
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Baby Groot Flower Pot Wall Mounted
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 162
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
I took HanochH's Happy Baby Groot Planter from Thingiverse and added the wall mount.
HanochH says no support is needed, but I used organic support for the mouth since it is a long print and I didn't want it to fail.
Groot is a bit asymmetric, so I the lower hole of the wall mount is a slot to align it.
I used 4 walls and 6% infill for the planter and 8 walls/20% infill for the wall mount bracket.
PLA with .2mm layer height works fine.
I also uploaded the 3mf of the colored version.
Use clear coat or resin and UV light to make it watertight!