Switchpanel for lack enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple switch panel to control the printer, LEDs and Raspi.
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 984
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
A simple switch panel to control the power of the printer, LEDs and a raspberry pi. It was designed to be mounted on the right hand side of the prusa lack enclosure (can be mirrored in the slicer to fit on the left side aswell). Maybe this can be useful for someone :)
Switches that were used (no affiliate link):
https://www.amazon.de/gp/product/B07QB22J62
Basic knowledge of electrical installation is required. I do not take any responsibility for damage on your hardware.
Print Settings
Print with the front on the build plate (see screenshot)
Brim: no
Supports: no
Resolution: 0.2
Infill: 15%
Material: doesnt matter, the one in the picture is made of PETG