Flashforge Adventurer 5m / 5m Pro Filter Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
High-flow filter cover replacement that matches the Thermometer / Hygrometer version.
- Ocena
- 5 / 5
- Polubienia
- 88
- Pobrania
- 567
- Wydruki
- 1
- Wyświetlenia
- 2062
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I had already designed an exhaust solution for the Adventurer 5m Pro (here), so wanted remove the exhaust filter and cover plate. I was also keen to keep an eye on temperature in the printer, so I designed the FlashForge Adventurer 5m / 5m Pro Filter Cover Thermometer / Hygrometer Mount by Simon | Download free STL model | Printables.com.
This filter cover simply matches the one with the sensor (linked above), but without the sensor. Why? Because aesthetics! It just looked wrong with two different style filter covers. It will probably increase the flow rate of air through the filter, if that is your aim too.
This design prints upright, so that the layer strength supports the operation of the clip. I printed in Elegoo matte PLA with a 0.2mm layer height, Arachne wall generator, 3 walls, 15% gyroid infill and tree supports. I had added tree supports as shown in the image to give it some lateral stability while printing.