1 / 3
KEA Skadis T-Handle Hexkey holder 3X Wera — zdjęcie 1
1 / 3

KEA Skadis T-Handle Hexkey holder 3X Wera

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

T-Hex handle holder for wera HexPlus with t handle (or others)

Ocena
0 / 5
Polubienia
4
Pobrania
22
Wydruki
0
Wyświetlenia
205
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Print with supports for the pegs! the pegs could be a little tight ( i think it depends on the board, one of mine it fit perfect on the other i had to sand the pegs down a little) 
to put it in angle it and then slide it in ( it wont always go in if you put it in straight! ) 

i modified the angle of the hex-t-handle holder, aswell as shortened it to only be 3x 

for 2mm 2.5 and 3mm wera ( might fit others ) 
hole sizes are 3.5mm  3.5mm and 4mm 

Tagi