1 / 4
Willy Wonka Magnet (multi-color)(8x3mm magnets) — zdjęcie 1
1 / 4

Willy Wonka Magnet (multi-color)(8x3mm magnets)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wonka

Ocena
0 / 5
Polubienia
4
Pobrania
15
Wydruki
0
Wyświetlenia
62
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial

Pictured Examples printed on a BambuLab X1C (Textured PEI)


Face-down Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s

 

Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). I apologize in advance for the extra work, but in the example, I did manually paint brush the outline of the darker purple of the jacket area, then filled it. I also manually brushed parts of the hat to fill it without changing the black outline of the rest of the model. I also did the same for the eyes, brushing the skin color on the outside of the eye, so I could paint bucket fill the rest of the face with skin tone.


8x3 Magnet recesses to allow gluing in the magnets easily (magnet strip can be used instead)

 

Hope you enjoy!


(see my profile for other multi-color prints)

Tagi