1 / 4
Average Joe's Dodgeball Magnet (multi-color)(8x3mm magnets) — zdjęcie 1
1 / 4

Average Joe's Dodgeball Magnet (multi-color)(8x3mm magnets)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Average Joe's Gymnasium

Ocena
0 / 5
Polubienia
8
Pobrania
17
Wydruki
0
Wyświetlenia
48
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Noncommercial

Pictured Examples printed on a BambuLab X1C (Textured PEI)


Face-down Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s

 

Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). Any additional coloring may have been added manually with the brush or paint bucket tools. There is a little tricky spot to color at the bottom of average joe's chin. The lettering for G and Y will need to be brushed off at just the top with your lettering color, making sure to keep the shape of the chin outline, then you can paint bucket fill the lower portions easily, without changing the entire black outline of the object.


8x3 Magnet recesses to allow gluing in the magnets easily (magnet strip can be used instead)

 

Hope you enjoy!


(see my profile for other multi-color prints)

Tagi