Gridfinity 1x3x12U Bin for five Snapmaker Hot Ends
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hold up to 5 Plug-in Hot Ends for Snapmaker A250/350 and Artisan Dual Extruder Module.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed this in PETG but PLA would work also. If you are using a fixed layer height you probably should go with 0.2mm or less. I used Cura Adaptive Layers so the layer height varied a fair amount depending on the detail needed. I've never had good luck printing text vertically and I didn't want to lay the model on its back and turn on supports so I printed the holder and the text separately and glued the text on afterward, or you could as well leave the text off, it could interfere with adjacent gridfinity bins anyway. I don't plan on putting any bins in front of this one since I need quick and easy access to grab/store Hot Ends.