Gridfinity 1x3x12U Bin for five Snapmaker Hot Ends
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hold up to 5 Plug-in Hot Ends for Snapmaker A250/350 and Artisan Dual Extruder Module.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 21
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed this in PETG but PLA would work also. If you are using a fixed layer height you probably should go with 0.2mm or less. I used Cura Adaptive Layers so the layer height varied a fair amount depending on the detail needed. I've never had good luck printing text vertically and I didn't want to lay the model on its back and turn on supports so I printed the holder and the text separately and glued the text on afterward, or you could as well leave the text off, it could interfere with adjacent gridfinity bins anyway. I don't plan on putting any bins in front of this one since I need quick and easy access to grab/store Hot Ends.