Suction cup shelf with suspension holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shelf bracket with additional small holes to thread string through for suspension support, making it much more secure.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to increase the strength and security of the @Madcamper/@rebeltaz design using suspension support. My plans for the shelf would ensure a great mess entails if the shelving bracket should fail.
Thus I wanted to “over-engineer” it to strengthen it substantially, with the easiest and simplest adaptation I could think of being the addition of two small holes to permit the attachment of additional suckers, to be connected to the shelf via a suspension “cable”.
The positioning of the holes on the holes near the extremity of the upper bracket serves to maximise the effect of the opposing moment to that that which is exerted on the shelf by any load-objects.
The holes added are 3.5mm, so designed for string up to around 3mm in diameter.