GU10 Lamp for gypsum/drywall ceiling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Its a lamp bot for gypsum drywall roofs ceilings
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 241
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a spotlight for a GU10 bulb, which is mounted outside the thread. It is easy to print and looks clean. Dimensions: 75x75mm. 4 screws (4mm), a GU10 bulb socket are needed for assembly.
SIZE:
Box: 75x75mm
Plate: 75x75mm
Gypsum ceiling: 12.5mm
For printing, it is advisable to use heat-resistant material, as in my experience the bulb can heat up to 50-70 C, where the PLA can melt. I used PETG for printing, and for SOCKET you may need either PA-CF or ASA/ABS.
The upper part only needed if you are changing from a deepened spotlamp. The upper part is only necessary if you want to install it in place of a spotlight with a pinhole.
GU10 Socket:
https://www.amazon.com/DiCUNO-Resistant-Maximum-Connector-Packages/dp/B07GVB2P2N/ref=sr_1_1_sspa?dib=eyJ2IjoiMSJ9.7TqpL-8-LcVw3kSjSjmFRGS-HMwK2sePgLWCruYChiCdqZFkiynO1f8kAV2vGuq1ITuAoa7xkOHmkR7Aif5Zm13dU_3xVhD0lHtJ9cM04WidQNcwihMSi9DcH1Y4vP1rDo3M_N4YfEG79hYpGsRcsEe0F9gMs_sOGNPFTDwmqOZuzQag3vFInTavWAMfYUnhksKjKh2CuA-vBSvQ9msVum7wPyGMxH8e60DXQpzxSnd77g38qP7Rcu0GAKOMYExxE2ZV-oaj1dcl_eIOolDI_N43VXrWDlCSjoaUyaXAHbQ.8GHT7EMYsiizRGDyHFUIJIMfEPiWuAL7EdEgQOgrPHs&dib_tag=se&keywords=gu10+base+socket&qid=1739741028&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1
If you want to customize it, you can download the .f3d file. :)