Dinghy Cleat for 6-12 mm rope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dinghy needs a cleat? Print this one! No support, two screws required. Good for many line diameters up to 14 mm useable.
- Ocena
- 5 / 5
- Polubienia
- 63
- Pobrania
- 277
- Wydruki
- 6
- Wyświetlenia
- 1591
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Simple cleat. Can handle up to 14 mm line.
Two 6mm fasteners required. Depth of hole from shoulder to base of cleat is 20 mm. The fastener should be at least this length plus whatever surface one will fasten to and enough for the bolt. In my case 30 mm. (see images)
No support required while printing in current orientation. Use many walls, at least 10, for maximum strength, this cleat is design to handle mooring and sailing loads but use at own risk. No infill.
I use this as my bow mooring on a small sailboat, also the foresail tack and bow line keeper while underway.
Fair winds!