Dinghy Cleat for 6-12 mm rope
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.93 – €3.58 net (excluding VAT)
For file: Bow cleat v3_3h34m_0.16mm_210C_PLA_ENDER3.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.25 excluding VAT (range midpoint).
- Weight reported by the author
- 34 g
- Print time reported by the author
- 3.57 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Dinghy needs a cleat? Print this one! No support, two screws required. Good for many line diameters up to 14 mm useable.
- Rating
- 5 / 5
- Likes
- 63
- Downloads
- 277
- Makes
- 6
- Views
- 1,592
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Simple cleat. Can handle up to 14 mm line.
Two 6mm fasteners required. Depth of hole from shoulder to base of cleat is 20 mm. The fastener should be at least this length plus whatever surface one will fasten to and enough for the bolt. In my case 30 mm. (see images)
No support required while printing in current orientation. Use many walls, at least 10, for maximum strength, this cleat is design to handle mooring and sailing loads but use at own risk. No infill.
I use this as my bow mooring on a small sailboat, also the foresail tack and bow line keeper while underway.
Fair winds!