1 / 5
AD5M Flashforge Lid Hinge — zdjęcie 1
1 / 5

AD5M Flashforge Lid Hinge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Does what it says on the tin. Lid hinge for the AD5M, uses filament as the axle. Has a stopper so the lid catches itself

Ocena
4,833 / 5
Polubienia
108
Pobrania
574
Wydruki
4
Wyświetlenia
3423
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I wasn't happy with the other lid hinges available online, so I made this one. Has a few cute features. Uses standard filament as the axle. Has a stopper on the top so the hinge catches itself and stays upright. I attached mine to the back of the printer, so the filament spool (which is required to mount the filament sensor) stops the lid. 

Designed with the standard AD5M enclosure. It is meant to be screwed in on the 45 degree chamfer on the enclosure top. 

Two hinges come in the file, as they are mirrored. You could easily print 2 of the same so the lid can come off easier. I like the idea of capturing the lid with the hinges. 

Requires :

  • 4  - M4 x 8 bolts and nuts for plastic lid
  • 4 - M4 x 8 bolts / screws to mount into enclosure
  • drilling into the enclosure chamfer and the lid
  • 2 x 15mm sections of filament

I used some loctite to secure the bolts to the enclosure. You could probably get away with gluing the whole thing. 

Recommended Print Settings:

PETG

No support

.4mm nozzle

.2mm layers

 

Tagi