1 / 5
AD5M Flashforge Lid Hinge — image 1
1 / 5

AD5M Flashforge Lid Hinge

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Does what it says on the tin. Lid hinge for the AD5M, uses filament as the axle. Has a stopper so the lid catches itself

Rating
4.833 / 5
Likes
108
Downloads
574
Makes
4
Views
3,423
Reviews
6

Updated at source:

Model information

License
Creative Commons — Attribution

I wasn't happy with the other lid hinges available online, so I made this one. Has a few cute features. Uses standard filament as the axle. Has a stopper on the top so the hinge catches itself and stays upright. I attached mine to the back of the printer, so the filament spool (which is required to mount the filament sensor) stops the lid. 

Designed with the standard AD5M enclosure. It is meant to be screwed in on the 45 degree chamfer on the enclosure top. 

Two hinges come in the file, as they are mirrored. You could easily print 2 of the same so the lid can come off easier. I like the idea of capturing the lid with the hinges. 

Requires :

  • 4  - M4 x 8 bolts and nuts for plastic lid
  • 4 - M4 x 8 bolts / screws to mount into enclosure
  • drilling into the enclosure chamfer and the lid
  • 2 x 15mm sections of filament

I used some loctite to secure the bolts to the enclosure. You could probably get away with gluing the whole thing. 

Recommended Print Settings:

PETG

No support

.4mm nozzle

.2mm layers

 

Tags