Baby Crib Mobile Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Baby Crib Mobile Arm optimized for IKEA GULLIVER and SNIGLAR It should work on any Crib. in 2 sizes and parametric.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 1273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
V2 update:
I needed the arm to be a bit taller, so I had to make it in 2 parts to fit in my printer. The design is parametric, if you have access to fusion, you can open and adjust the variables to make it fit.
To attach the 2 parts you can either use a large wood screw, or an M5. I had better lock with wood screw. I sanded the bed side of the part with a course sand. Print it with Mat PLA, it's easier to sand.
V1:
I have 2 sizes already exported, one for a 300x300 bed size and one for 250x250.
You can open the parametric file and adjust it to your liking, the picture is the medium size.
It attaches securely using a simple screw and washer. I printed in Matt PLA.
The design is optimized for easy printing and good bed adhesion, so one side has a slight flat side. depending on where on the bed you're mounting it, you can flip it so the “bad” side can be hidden.
The round profile can be changed to a square profile in the parametric file.